Barber schools by state differ most in hours: the standard routes we checked run from 900 hours in Florida and New Jersey to 1,800 in Ohio. Before enrolling, confirm the school is properly authorized and its program meets your licensing agency’s training rules. Accreditation is generally one requirement for federal student aid. Your state’s page has the rest.
Before you put a deposit down anywhere, you need two answers: is the school properly authorized, and does its program meet the training rules of the agency that will license you? This guide to barber schools by state covers both, plus what accreditation does and doesn’t do for you and what a barber program teaches. Every hour count on this page was checked against an official source in November 2026.
Barber School Info By State
- Alabama
- Alaska
- Arizona
- Arkansas
- California
- Colorado
- Connecticut
- Delaware
- District of Columbia
- Florida
- Georgia
- Hawaii
- Idaho
- Illinois
- Indiana
- Iowa
- Kansas
- Kentucky
- Louisiana
- Maine
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- Nevada
- New Hampshire
- New Jersey
- New Mexico
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Oregon
- Pennsylvania
- Rhode Island
- South Carolina
- South Dakota
- Tennessee
- Texas
- Utah
- Vermont
- Virginia
- Washington
- West Virginia
- Wisconsin
- Wyoming
Accredited Barber Schools: What Accreditation Covers
Accreditation and licensing are two different checks, and people mix them up all the time. The U.S. Department of Education’s list of recognized institutional accreditors says accreditation by a listed agency may be used to establish a school’s eligibility for Title IV aid. That’s the federal grant and loan programs. Accreditation is generally one requirement, not the whole story: a school must also apply to and receive the Department’s approval to participate, and your specific program has to take part in the aid you plan to use.
Your license is a separate question. Accreditation alone doesn’t establish licensing eligibility, and states differ on which schools count. Florida, for example, accepts training from a barber school licensed under chapter 1005 of its statutes, a public school barbering program, or a government-operated program (Fla. Stat. 476.114). If you’re counting on a Pell Grant or federal loans, check both the license side and the aid side.
These four accreditors are on the Department’s list and accredit the kinds of career schools that run barber programs:
- National Accrediting Commission of Career Arts and Sciences (NACCAS): schools and departments of cosmetology arts and sciences
- Accrediting Commission of Career Schools and Colleges (ACCSC): schools built to train students for occupational, trade, and technical careers
- Accrediting Council for Continuing Education & Training (ACCET): institutions offering continuing education and vocational programs
- Council on Occupational Education (COE): occupational schools offering non-degree and applied associate degree programs
Where NACCAS and COE Stand as of November 2026
NACCAS is the accreditor whose scope is cosmetology arts and sciences schools, and it says it accredits approximately 1,300 institutions. At its July 2026 meeting, NACIQI, the Department’s advisory committee on accreditation, voted to recommend denying NACCAS renewed recognition. In a decision letter dated October 21, 2026, the Department instead continued NACCAS’s recognition for 12 months, subject to a limitation. While it lasts, NACCAS may not grant accreditation or preaccreditation (candidacy) to any new institution, pending applications are held in abeyance, and no school moves from candidacy to accreditation.
COE got a letter the same day with the same kind of limitation: no accreditation or preaccreditation for new institutions, and no moves from candidacy to accreditation while it stands.
The October 21 action does not itself withdraw accreditation from schools already accredited, but it pauses pending applications and moves from candidacy to accreditation. Check the individual school’s current accreditation and federal aid status, and use the Department’s list, not a school’s brochure, to confirm where its accreditor stands.
Barber School Requirements by State
Every state sets its own training rules. Before enrolling, confirm the school is properly authorized and that its program meets the training requirements of the agency that will license you. This table lists standard school training hours for the license routes shown in seven places we checked, and they run from 900 to 1,800 hours.
| Place | Standard School Hours | Official Source |
|---|---|---|
| Florida | 900 standard curriculum. Exam eligibility may begin at 600 school hours with school certification | Fla. Stat. 476.114 |
| New Jersey | 900 | N.J.A.C. 13:28-1.1 |
| Arkansas | 1,500 | State Board of Barber Examiners rules, Rule 8 |
| District of Columbia | 1,500 | DC Board of Barber and Cosmetology |
| Georgia | 1,500 for master barber, over at least nine months | Ga. Comp. R. & Regs. 240-14-.02 |
| North Carolina | 1,528 | NC Board of Barber and Electrolysis Examiners, 21 NCAC 06F .0120 |
| Ohio | 1,800 | Ohio Revised Code 4709.07 |
Florida cut its standard requirement from 1,200 hours to 900 on January 1, 2021. A guide that presents 1,200 hours as Florida’s current requirement is out of date.
School Hours Are Only the First Number
In some states, finishing school earns you a starter license, not the full one. North Carolina’s 1,528 hours lead to written and practical exams for an apprentice license, then a 12-month apprenticeship and one more practical before you’re a licensed barber. Our page on North Carolina’s barber license requirements walks through each round.
Kentucky also licenses barbers in stages, with an apprentice license between barber school and the full barber license. Here’s how Kentucky licenses barbers, start to finish.
New Jersey’s rules call for a 900-hour barbering course, and the license comes from the State Board of Cosmetology and Hairstyling, not a stand-alone barber board. These are the barber license requirements in New Jersey, step by step.
Apprenticeship Routes Can Take Longer
Some states let you train in a shop instead of a school, and the hours usually go up. Georgia’s master barber school course is 1,500 hours over at least nine months. Its master barber apprenticeship runs at least 18 months and 3,000 hours, and apprentices must take the theory part of the state exam within their first 12 months. Georgia’s barber licensing steps cover both routes.
Crossing Over From Cosmetology
Already hold a cosmetology license? You may not start from zero. Ohio requires 1,800 hours of board-approved training for a barber license. If you hold a current Ohio cosmetology or hair designer license, it’s 1,000 hours (Ohio Revised Code 4709.07, in effect since October 24, 2024). The full process is in our guide to barber license requirements in Ohio.
New Mexico’s crossover is shorter still. Under 16.34.8.16 NMAC, a licensed cosmetologist completes 150 course hours in beard trimming and shaving, unless otherwise approved by the board, and must pass a practical exam in those crossover subjects. See New Mexico’s barber license rules for the rest. Arkansas’s board rules set a 550-hour cosmetology crossover program against the 1,500-hour barber course, and our Arkansas barber school and license guide covers both.
Know Which Agency Licenses You
Several states have folded barbering into a combined board, so the agency name in an old guide may be wrong. Alabama licenses barbers through the Alabama Board of Cosmetology and Barbering, and our page on Alabama’s barber license requirements follows that board’s process. Massachusetts uses the Board of Registration of Cosmetology and Barbering, which licenses cosmetology, barbering, and electrology. Start with how to get a barber license in Massachusetts.
In Louisiana, confirm the school’s standing and hour count with the state’s barber licensing board before you enroll. Our Louisiana barber license requirements page lays out the order. Florida’s license comes from the Barbers’ Board in the Department of Business and Professional Regulation. The District’s comes from the DC Board of Barber and Cosmetology, part of the Department of Licensing and Consumer Protection.
What You’ll Learn in Barber School
Barber programs pair classroom theory with clinic floor time. You’ll usually start on mannequins, then move to paying clients in the school’s clinic. Ask whether the required kit is included in tuition, sold separately, or bought elsewhere before you compare prices.
State rules set required curriculum components, and schools may add instruction of their own. Arkansas’s board rules assign 425 of the 1,500 hours to haircutting, 345 to chemical services, 175 to related sciences, and 50 to shaving and beard trimming. Georgia’s master barber curriculum sets aside 25 hours of shaving theory, including the 14-stroke straight razor process, before students work on a client.
Hands-On Skills
- Men’s haircutting: tapers, fades, buzz cuts, high and tight, and razor cutting
- Straight razor shaving, plus beard and mustache trimming
- Scalp treatments, shampooing, and hair care
- Basic haircutting for women
- Hair coloring, chemical relaxing, and permanent waves
- Hairpieces and wigs
Classroom Training
- Sanitation, disinfection, and infection control
- Chemistry, bacteriology, anatomy, and physiology
- Recognizing skin and scalp conditions
- Your state’s barbering laws and rules
- Client communication, sales, and shop management
- Preparation for the licensing exams your state requires
How to Check a Barber School Before You Enroll
- Confirm the school is properly authorized, and look for it on your licensing agency’s school list if the agency keeps one. Kentucky and North Carolina both publish one.
- Match the program’s hours to your state’s requirement, and ask how many hours a day the school credits.
- If you need federal aid, look up the school’s accreditor on the Department of Education’s list, and ask the financial aid office whether your specific program participates.
- Ask how the school prepares you for your state’s licensing exams. Georgia, for example, schedules its master barber theory and practical exams through PSI, and the PSI Georgia Master Barber test taker guide explains both.
- Get the full cost in writing: tuition, kit, books, and exam fees.
Frequently Asked Questions
How many hours is barber school?
It depends on your state and your license route. In the seven places we checked in November 2026, standard school routes run from 900 hours in Florida and New Jersey to 1,800 in Ohio. Arkansas, the District of Columbia, and Georgia’s master barber course sit at 1,500, and North Carolina requires 1,528. Florida also lets a school certify you for the exam after 600 actual school hours.
Does a barber school have to be accredited?
Accreditation alone does not establish licensing eligibility. Your program must meet your state’s training requirements. Accreditation by an accreditor the U.S. Department of Education recognizes is generally one requirement for federal student aid, and the school and your specific program must also participate in the aid programs.
Is NACCAS still a recognized accreditor?
Yes, as of November 2026. On October 21, 2026, the Department of Education continued its recognition subject to a limitation that bars it from accrediting new institutions, and COE is under the same kind of limitation. The October 21 action does not itself withdraw accreditation from schools already accredited, but it pauses pending applications and moves from candidacy to accreditation. Check the individual school’s current accreditation and federal aid status.
Can I become a barber through an apprenticeship instead of school?
In some states, yes, but it can take longer. Georgia’s master barber apprenticeship runs at least 18 months and 3,000 hours, compared with a 1,500-hour master barber school course. In Kentucky and North Carolina, the apprenticeship comes after barber school rather than replacing it.
I’m a licensed cosmetologist. Do I have to finish a full barber program?
Not always. Ohio accepts 1,000 hours instead of 1,800 if you hold a current Ohio cosmetology or hair designer license. New Mexico requires 150 hours of beard trimming and shaving plus a practical exam, unless the board approves otherwise, and Arkansas has a 550-hour crossover program.
- Authorization comes first: Before enrolling, confirm the school is properly authorized and its program meets the training requirements of the agency that will license you.
- Accreditation is one aid requirement: It’s generally one requirement for federal student aid, and NACCAS and COE are both under an October 21, 2026 limitation on new institutions.
- Standard hours vary widely: The standard routes we checked run from 900 hours in Florida and New Jersey to 1,800 in Ohio.
- Cosmetologists can cross over: Ohio, New Mexico, and Arkansas all offer shorter routes for licensed cosmetologists.
You know the standard hours for your state’s route. Now compare the schools near you that deliver them: how each one is authorized, what it charges, and whether its class schedule fits around your job.